Section: ユーザーコマンド (1) Updated: 2021年5月 Index JM Home Page roff page 名前 stat - ファイルやファイルシステムの状態を表示する 書式 stat [,OPTION/]... ,FILE/... 説明 ファイルまたはファイルシステムの情報を表示します。 長いオプションで必須となっている引数は短いオプションでも必須です。 -L, --dereference リンクを辿る -f, --file-system ファイル情報ではなくファイルシステム情報を表示する --cached=,MODE/ キャッシュされた属性の使用方法を指定する; リモートファイルシステムの場合に役立つ; 下記の MODE を参照 -c --format=,FORMAT/ デフォルトの代わりに FORMAT で指定した書式で表示する。 FORMAT が適用後
3.7.5 Exit Status The exit status of an executed command is the value returned by the waitpid system call or equivalent function. Exit statuses fall between 0 and 255, though, as explained below, the shell may use values above 125 specially. Exit statuses from shell builtins and compound commands are also limited to this range. Under certain circumstances, the shell will use special values to indi
reportbug を用いて Debian のバグを報告する方法 Debian のバグは、reportbug プログラムを用いて報告することを強くお勧めします。これをインストールして起動するには、単に次のように実行します: # apt-get install reportbug $ reportbug reportbug は、ステップバイステップの手順でバグ報告作業を導いてくれます。 reportbug の対話的なプロンプトで解決されない問題が生じた場合は、 この文書の以下の内容を参照するか、Debian ユーザメーリングリストに質問するとよいでしょう。 メールを用いて Debian のバグを報告する方法 (および reportbug の高度な使い方) バグ報告を送る前に注意する重要事項 どのパッケージに対するバグ報告なのか? バグ報告をどのパッケージに対してすべきか知る必要があります。
なかなかSICPに手を付けれずなので、仕事で始めて触ったGPGのコマンドライン上での暗号化復号化についてメモっておこうと思う。 GPGとは、Wikipediaによると GNU Privacy Guard (GnuPG) とは、Pretty Good Privacy (PGP) の別実装として、GPL に基づいた暗号化ソフトである。 OpenPGP 規格 (RFC4880) に完全準拠しているが、古い PGP との互換性は完全ではない。 ということらしい。 認識では、公開鍵暗号方式でファイルを暗号化するものと思ってる。 通信系にも使われてるのかな? 今回使うバージョンはこんな感じ。 $ gpg --version gpg (GnuPG) 1.4.11 Copyright (C) 2010 Free Software Foundation, Inc. License GPLv3+: GNU G
インターネットのホームページを表示するサーバーで広く利用されているプログラムに重大な欠陥が見つかり、放置しておくと、個人情報の流出などを招くおそれがあるとして、セキュリティー機関などが早急な対策を呼びかけています。 欠陥が見つかったのは、Linuxという基本ソフト上で動く「bash」と呼ばれるプログラムで、インターネットのホームページを表示するサーバーで広く利用されています。 このプログラムについて25日、外部からコンピューターを勝手に操作されかねない重大な欠陥があることが明らかになりました。 この欠陥を悪用されると、サーバーに保管されている個人情報が流出したり、ホームページを閲覧した人のパソコンが、ウイルスに感染するよう仕組まれる危険性があるということです。 このため、セキュリティー機関のJPCERTなどは、このプログラムを利用しているサイトに欠陥が修正された最新のプログラムを早急に導入
Ubuntu Weekly Recipe 第291回tmux/GNU Screenのラッパーコマンド、byobuを使いこなす(2013年版) Ubuntuには、byobuというtmux/GNU Screenのラッパーコマンドが準備されています。これらのコマンドをうまく利用することで、ターミナル上での作業効率を大きく引き上げることができます。今週は、2013年現在のbyobuの利用方法を紹介します。 Byobu Ubuntuでは、GNU Screenやtmuxのラッパーコマンドである「byobu」を利用することができます。デスクトップ版には標準では導入されていませんが、次のように操作することで簡単に導入できます(サーバー版ではデフォルトで導入されています)。 $ sudo apt-get update $ sudo apt-get install byobu GNU Screenとtmu
The GNU Core Utilities are the basic file, shell and text manipulation utilities of the GNU operating system. These are the core utilities which are expected to exist on every operating system. Getting Help Check Questions and Answers for common problems: Coreutils FAQ Read the manual locally using info coreutils or see the latest online manual (日本語). The Coreutils Gotchas contains a list of some
GDB でレジスタを表示するときに (gdb) info register rax # もしくは i r rax としていたが、レジスタは変数としても参照可能なことを知った。頭に $ をつけるだけ。 (gdb) print/x $rax 変数として参照できるので、操作の度に自動でレジスタを表示する display コマンドを設定する事が可能。 (gdb) display $rax また register をポインタに cast してごにょごにょとかも可能。 (gdb) print/x ((intptr_t*)$rax)[1] $1 = 0x415a2c .gdbinit # http://0xcc.net/blog/archives/000126.html set history save on set history size 10000 set history filename ~/.
リリース、障害情報などのサービスのお知らせ
最新の人気エントリーの配信
処理を実行中です
j次のブックマーク
k前のブックマーク
lあとで読む
eコメント一覧を開く
oページを開く