はてなブックマーク

Thanks for your help. Background: Pi 3 B Rasbian Jesse 2017-01-11 Extracted .img to local hard drive, file size 4.07GB New SD Card, ran SDFormatter, FAT32, Full (Overwrite), Adjust ON Format completed successfully. Dragged .img file to card. ERROR: (paraphrased): File too large for destination filesystem (FAT32) Searching google, found that 4.00 GB is max single file size for FAT32 system Apologie

raspberry pi3で、電源を入れてからログイン画面が表示されて、ユーザー名"pi"でデフォルドパスワード”raspberry”と入れてもログインできず、再度ログイン画面に戻ってしまう現象が起きています。 この時にわざと間違ったパスワードを入力すると、”incorrect password.please try again”と表示されるのですが、正しいパスの"raspberry"と入力した場合は、この表示は出てこないので、パスワードは間違っていないようなのですが、ログインできずログイン画面に戻ってしまいます。 心当たりとして、最近ラズパイのプログラミングをPC側の画面で行いたいと思い、tightvncserverをインストールして使用しています。その頃からこの現象が出てきたような気がします。 また、tightvncserverインストール後にこの現象が起きたというサイトを目にしたこと

rpiMike Posts: 2255 Joined: Fri Aug 10, 2012 12:38 pm Location: Cumbria, UK New Minecraft 1.12 thread (21/07/17) : viewtopic.php?f=78&t=186547 New simplified tutorial (22/04/16) : Tutorial Video : https://www.youtube.com/watch?v=EVpGh0zFInM 1 Make sure you have the latest Raspbian Jessie : 2 In Menu\Preferences\Raspberry Pi Configuration : Set overclock to High(1000MHz) (for Pi2, ignore for Pi3) S

Fidelius Posts: 485 Joined: Wed Jan 01, 2014 8:40 pm Location: Germany When on 29th February 2016 Mr. Upton made the nice Pi3 anouncement, in the posts below the announcement, a user asked if the Wifi and Bluetooth features of the Pi3 could be disabled. Mrs. Upton kindly answered: Liz Upton wrote:You can turn Bluetooth and WiFi off – we’ll make sure there’s an easy interface for you to do that wit

Hi folk. Im just learning about the RasPi. I have a small network at home which I want to connect my Pi to (desktop unit + a couple of laptops). How do I get it to see the network and the network to see it? On my main pc Im running win 10 through a BT hub 5. The hub can see all the devices including the Pi but none of them can see the Pi or visa versa. can anyone help please? Edit: I should add th

Hi all, I've overclocked my Raspberry Pi to 850. To do this, I did a manual change to the /boot/config.text file that reads: arm_freq=850 sdram_freq=500 When I run two different commands to determine my true CPU clock speed I get two different results. 1. cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_cur_freq I get 700000 2. vcgencmd get_config arm_freq I get arm_freq=850 Which command is givin

kusti8 Posts: 3439 Joined: Sat Dec 21, 2013 5:29 pm Location: USA Here's a quick guide for anyone wanting a updated Chromium with Chrome Web Store support on plain Raspbian. THIS GUIDE IS NOW NOT NEEDED, PREBUNDLED WITH RASPBIAN! YAY! 1. Install and configure Raspbian. There are plenty of guides on how to do this. A more detailed intro to RPi-youtube 2. Add the Chromium repository and install the

Hello, Raspbian (2015-11-21-raspbian-jessie.zip SHA1: ce1654f4b0492b3bcc93b233f431539b3df2f813) doesn't enable hardware random number generator by default. This causes generation of predictable SSH host keys on the first boot. As soon as the systems starts up systemd-random-seed tries to seed /dev/urandom, but /var/lib/systemd/random-seed is missing, because it hasn't been created yet. /etc/rc2.d/

mahjongg Forum Moderator Posts: 14743 Joined: Sun Mar 11, 2012 12:19 am Location: South Holland, The Netherlands If you have a PI Zero that won't boot, please read the PI Zero specific third post in this thread, before continuing here. If you have a PI 4B or RPI400 that won't boot, please read the PI 4B/400 specific fourth post in this thread, before continuing here. If you are reading this, you a

Hi Raspies ! I've been playing for a while with a Raspberry 2 with Raspbian Squeezy, following an Openframeworks (www.openframework.cc) thread. So right now i've a 3.18.7-v7+ kernel ... I'm willing to use the Enttec Open DMX usb to dmx controller. I've first installed the FTDI drivers from it's website and got to install the libftd2xx1.1.12_Release. I've 2 types of USB-DMX Enttec controllers : the

{sig} Setup: Original version Raspberry Pi (B, rev1, 256MB), Dell 2001FP monitor (1600x1200), 8GB Class 4 SD Card with Raspbian and XBMC, DD-WRT wireless bridge There is no reasonable way to get iTunes running on the PI! Itunes is closed source, and only runs on intel CPU (x86) based systems (Windows and Mac OS X). Because its closed source it cannot be converted to work with Linux, not to run on

gkreidl Posts: 6345 Joined: Thu Jan 26, 2012 1:07 pm Location: Germany Edit April, 7th, 2017: New thread title and support for other browsers. Edit Otobert, 13th, 2017: Added Stretch support Flash support is now realized in chromium-browser using the pepperflash plugin. It is installed by default on new images and can be installed on older systems with rpi-chromium-mods. By adding a wrapper it can

皆様、こんばんは。 Subjectの方法が分からず悩んでいます。 どなたかにアドバイスを頂けたらと思い、投稿させていただきます。 よろしくお願いいたします。 Rasbianのインストール時に Desktop Log in as user 'pi' at the graphical desktopを選択して OS起動後にデスクトップを表示させています。 デスクトップ起動後に Pythonで作成したウィンドウを表示するプログラムを 自動的に表示させたいと考えています。 crontab -e コマンドにて @reboot export DISPLAY=:0.0 & /usr/bin/python /home/pi/window.py という行を書いてOSを再起動させたのですが、自動的に表示されません。 SSH接続をして export DISPLAY=:0.0 & /usr/bin/python

Over the weekend I began experimenting with the camera board. I wanted to process the raw h264 stream coming out of raspivid to segment it. [First of all: read here about about SPS/PPS and the Raspberry Pi Camera https://github.com/AndyA/psips. Thanks Andy!] I tried using the installed aconv to segment the resulting video stream, but to no avail. I had hoped to avoid compiling ffmpeg, but in the e

MrEngman Posts: 4140 Joined: Fri Feb 03, 2012 2:17 pm Location: Southampton, UK Driver files available for the TP-LINK TL-WN725N V2 and similar wifi dongles using the 8188eu driver module for systems using the Raspbian image. LAST UPDATED: 05/12/2019 MAJOR UPDATE:- The list of drivers available generally covers kernel versions 3.18, 4.0, 4.1, 4.4, 4.9, 4.14 and 4.19 although there may be limitatio

I have discovered that my PI2 is camera-shy ! Taking it's picture with a flash causes an instant power off ! I've done it three times now and same thing happens each time. First two times I didn't realise what had happened as I wasn't looking at the screen at the time and only noticed a few minutes afterwards. Third time I did it just to watch the screen.... Instant power off..... Any ideas ? Pete

lseidman Posts: 15 Joined: Fri Sep 07, 2012 7:31 pm Location: Las Vegas, NV Hi everyone, As you may already be familiar with SELinux or perhaps not but I won't go in to discussion what exactly it is, know though that the NSA from the USA created it years back and I am an avid user. I recently got my Raspberry PI and using Raspbian but had an abundant amount of time trying to figure out why every r

This is a post on the Piracast project, source code released under GPL: https://github.com/codemonkeyricky/piracast To compile and run, see README in the repository. Limitations: - Only works with TP-LINK TL-WN725N (Miracast requires hardware support, so it can't run on all Wifi dongles. I've only included the driver for this specific dongle). The specific one I have is a V2 (version 2). - Only wo

masafumi_ohta Forum Moderator Posts: 480 Joined: Sun Sep 09, 2012 12:07 am Location: Tokyo 太田です。 同僚からホットスポットアプリのcoovachilliを動かせとせっかちにいわれたので、実験してみました。 日本語のドキュメントがこのcoovachilliにはほぼなく、ログとして残しておいた方がいいなと思い、ここにログを残します。 環境設定としては、wlan0をパスワードなしAPとしアクセスできるようにし、coovachilliのweb認証でログインする環境です。 [iPhoneなどのモバイル] --- [wlan0 AP] --- [coovachilli] --- [ internet ] という環境です。認証としてradiusを使います。 ダウンロードはここから http://ap.coova

野口と申します。 表題の件、RaspberryPiにて日本語キーボードが利用できなくて困っており、お知恵を拝借できればと考えております。 当方利用のキーボードはLogicool社（Logitech）のK270というUnifyingワイヤレス日本語キーボードです。これをRaspbian上で利用しようと思いインストールして利用していましたが、どうも英語キーボードと認識されてしまっております。 OS: Raspbian "Wheezy" (2013-05-25-wheezy-raspbian.zip から作成） 行った設定は、 $ sudo raspi-config にて、キーボードレイアウトから [標準105キー　(国際) PC]-[日本語 - 日本語 (OADG 109A) ] としリブートしましたが、Shift+2キーで＠マークが出力される状況（英語モード？）です。 Ctrl+[SPACE

I've got some basic prototyping example code for this type of thing that you are welcome to experiment with. The v4l2capturetoH264.c source file and Makefile can be found at: http://www.trans-omni.co.uk/capture There is also a short two minute capture example, in the same location, which shows a capture of the big buck bunny movie using the code. This was captured with a STK1160 USB capture device

Task: Virtualise Raspbian Wheezy 2013-02-09 on Ubuntu Linux 12.10 Why?/What do I get? It's a pretend Raspberry Pi, running completely in software, on your desktop, that you can use as if it is a real one (minus the ports and GPIO obviously). LXDE (Desktop) runs, and the internet/network is connected. You can SSH into it, make copies of it, trash it, start a new one from a previous saved copy, and

mitsunori Posts: 45 Joined: Mon Dec 31, 2012 9:03 am Location: Tokyo, Japan 読みなおしてみたらコピペの失敗などがありましたので訂正します。 ---------- mitsunori と申します。 Raspberry Piでインターネットラジオを受信する方法は各方面で紹介され ることが多いようですので興味をお持ちの方も多いのではないでしょうか。 かくいう自分自身のRaspberry Piの購入動機の一つがインターネットラジ オ受信だったりします。 これまで、BB-Shout (http://bb-shout.tristate.ne.jp/)を使用して いました。この製品はSHOUTcast系の受信機能専用です。SHOUTcastだけで も、大変な局数を配信していますが、これ以外の方式も受信したいと考えるとこ ろです。

Here is my solution for racking Raspberry Pis, using a block of plyboard and the audio and video jacks as mounts. This allows simple plugging in and out.

bwann Posts: 4 Joined: Sat Oct 13, 2012 7:13 am Location: Fremont, CA In case you've ever wondered, you can indeed run a full Hadoop cluster on a stack of Raspberry Pis! It's certainly not fast by any means, MapReduce jobs are more like tiny data crunching, but at least you can amass a surprising amount of HDFS storage. Why do this? To see if it can be done! I had a stack of Pis that I wasn't quit

I've been trying to make sure I properly understand the Raspberry Pi boot process. What I understand so far, mostly from the config.txt thread, is this: When the Raspberry Pi is first turned on, the ARM core is off, and the GPU core is on. At this point the SDRAM is disabled. The GPU starts executing the first stage bootloader, which is stored in ROM on the SoC. The first stage bootloader reads th

5 Replies 28222 Views Last post by ekzemplaro Sun Oct 25, 2015 12:42 am