■ IPアドレスとMACアドレス ■ 前回はsniffingを行っている人を特定する説明のほんのさわり を紹介しました。 普通にインターネット上を流れているデータを比較しただけで は盗聴を行っている人を特定する事は不可能だという事を説明 しました。 今回は盗聴を行っている人を特定する説明の続きを行います。 前回紹介したように、普通にインターネット上を流れているデ ータを見ただけでは盗聴を行っている人を特定する事は困難で す。 何故かというと、盗聴する前のデータと盗聴された後のデータ に変化が無いからです。 それでは、どうやって特定すれば良いのでしょうか? それにはまずインターネット上でデータがやりとりされる仕組 みを知らなければなりません。 インターネット上で使用されるアドレスには2種類の物があり ます。 1つはIP(Internet Protocol)アドレス。もう1つはMAC(Medi
今回も受講者の方からよく頂く質問第2弾。 IPアドレスとMACアドレスの違いは? 特にMACアドレスがなぜ必要なの? というご質問です。 IPアドレスは、前回も触れましたが、こちらはTCP/IPで通信をする際にホストを識別するための情報でした。 ではMACアドレスは? これは、LANカードを識別するための一意なID、アドレスになります。48ビットで構成されており、LANカード出荷時点で既にROMに焼き付けられているアドレスですので、私たちが直接設定したり変更したりすることは特にありません。 が、通信を行う上で重要な役割を担っています。 TCP/IPで通信を行う際、IPアドレスは相手にデータを届けるために必要となる理由は理解しやすいと思われます。 宛先のIPアドレスがないと、だれに届ければよいかがわからないですもんね。 ではMACアドレスはどのように使用されるのでしょうか。 IPアドレスとは
ログインに失敗しました。再度、お試しください。 入力に誤りがあります。正しいEメールアドレスもしくはパスワードを入力してください。
全2重通信はどう実現する? 4対のケーブルを使ってデータを送信するのはわかったが,ここで一つの疑問が浮かんでくる。それは「データの受信はどうするのか」という問題だ。 10M(10BASE-T)や100M(100 BASE-TX)のイーサネットでは,データを送信しながら同時に受信するという全2重通信が可能だ。もともと,送信と受信で別々のより対線を使って通信しているので,全2重通信を実現するのは簡単なのである。しかし,1000 BASE-Tの場合,4対あるより対線すべてを1Gビット/秒のデータを送るために使ってしまうので,送信と受信を別々のケーブルで行うというわけにはいかない。 それでは1000BASE-Tは全2重通信をサポートできないのか。いや,もちろんそんなことはない。実は,4対すべてのケーブルでデータを送信し,同時に受信するのである(図2[拡大表示])。 このしくみを実現するために,10
特別企画 最新ネットワークケーブル事情 UTPはギガビットの時代へ ~1000BASE-Tの登場~ 中村哲也 ブライトンネット 2000/05/23 高速ネットワークのギガビットイーサネット ギガビットイーサネット(Gigabit Ethernet)は、伝送速度が10BASE-Tの100倍にあたる1000Mbps(1Gbps)の伝送速度を発揮できるイーサネットの規格です。ギガビットの速度を持つネットワーク規格にはATM(Asynchronous Transfer Mode)などもありますが、ギガビットイーサネットは従来のイーサネットの上位互換にあたるため、既存の10BASE-Tや100BASE-TXによるネットワーク資産、管理ノウハウを継承しながら、ギガビット・ネットワークへと移行できるというメリットがあります。 ネットワーク全体を一気に変更することなく、10BASE-Tから100BASE
Ethernetのケーススタディ(2) 10BASE5→10BASE2→10BASE-Tという変遷では、基本的にはネットワークの性能自体は変わらず、最高10Mbpsというスペックだったが、実質的な速度は3〜4Mbpsというところだった。これはCSMA/CD(Carrier Sense Multiple Access/Collision Detection)なる方式を使っている事と関係がある。 CSMA/CDというのは、要するに「最初にバスの状態を一定時間(IFG:InterFrame Gap)確認して利用可能と判断できたらデータを送り出す。ただその際にアービトレーションは行わないので、結果として他のノードからの送信データと衝突が発生した場合には(乱数で適当に待ち時間を置いた後)再送する」というプロトコルだが、この衝突が大体30%を超える程度になると速度の限界に達するという経験則があり、数台
BeSTORM A black box fuzzer, a method of dynamic application security testing, that uncovers unknown security weaknesses during the product development stage, so fixes can be made before a product is launched. This chaos testing style requires no source code to run and offers more than 250 pre-built protocols and modules or the option for custom protocols. LEARN MORE BeSECURE A vulnerability assess
モバイル用 G.992 Annex I 辞書:通信用語の基礎知識 固定電話技術編 (WTELFT) 読み:ジーきゅうきゅうに・アネックスアイ 外語:G.992 Annex I 品詞:固有名詞 2015/01/31 作成 Tweet 転送案内のページです。解説については下のリンクを参照してください。 ITU-T G.992 Annex I 通信用語の基礎知識検索システム WDIC Explorer Version 7.04a (27-May-2022) Search System : Copyright © Mirai corporation Dictionary : Copyright © WDIC Creators club ▼機能別検索 ▼別の語で検索 ▼索引検索 アイウエオ カキクケコ サシスセソ タチツテト ナニヌネノ ハヒフヘホ マミムメモ ヤユヨ ラリルレロ ワヰヴヱヲ ン A
PPPoA ( PPP over ATM ) PPPoA は PPP over ATM の略であり PPP 機能を ATM を通して利用するプロトコルです。 PPPoA を採用しているADSL事業者は「 イーアクセス & アッカネットワークス 」の2社です。 PPPoA では ADSL回線事業者から提供される[ ADSLモデム ]がPPP接続を終端するので ISPから付与されるグローバルIPアドレスは [ ADSLモデム ] が持つことになります。 PPPoEで使用されるADSLモデムが [ ブリッジモデム ] であることに対して PPPoAで使用 されるADSLモデムは [ ルータ内臓モデム ] であることから、Ciscoルータを利用したADSL 接続はできません。PPPoAの場合はグローバルIPアドレスをPCで持つことはないことから PPPoEよりもセキュリティの面で優
PPPoEとPPPoA(ADSL接続サービスのプロトコル) ADSLサービスの接続方式には以下の4つの形態があります。 (1) PPPoE (PPP over Ethernet) (2) PPPoA (PPP over ATM) (3) IPoA (IP over ATM) (4) DHCP (1)(4)の接続方式ではブリッジタイプのADSLモデムを使用するのに対し、(2)(3)の接続方式ではルータタイプ(ルータ内蔵)のADSLモデムを使用します。 PPP接続を利用する方式((1)(2)の接続形態)は、いわゆるホールセール型のADSLサービスに適用される方式です。ホールセール型サービスではADSL事業者とISPが異なるため、ユーザがISPをダイナミックに切り替えて接続できる必要があります。 この接続方式で使用されるユーザアカウントはメールアドレスと同様に の形式をとり、@
リリース、障害情報などのサービスのお知らせ
最新の人気エントリーの配信
処理を実行中です
j次のブックマーク
k前のブックマーク
lあとで読む
eコメント一覧を開く
oページを開く