(「Raspberry Pi 1」を使用した、古い情報です。 新しい情報は、「ホーム > フィジカルコンピューティング > RCタンクを作る(Raspberry Pi 3)」にまとめています。) タミヤの楽しい工作シリーズの「トラック&ホイールセット」と「ツインモーターギヤーボックス」と「ユニバーサルプレート」でタンクを作り、タンクに Raspberry Pi を乗せて、Wi-Fi通信で、Webブラウザで操縦する RCタンク を作成する方法に関して書きとめています。
CentOS 6 へインストールを試みたのだけれど全くうまくいかないので、常時動いている Raspberry Pi (IP: 192.168.11.20) がいたのでそちらで使えるようにすることにした。 基本的には Homebridge の Wiki を読んでその通りに行う。 システムをアップデート $ sudo apt-get update $ sudo apt-get upgrade アップデート中に次のように訊かれた。Diff を取ってみたらおそらくこの Raspberry Pi で動いている別プログラムの GPIO まわりの設定に関してだったので、弄らないほうがよかろうという判断で現在のバージョンを維持した。 Configuration file '/etc/udev/rules.d/99-com.rules' ==> File on system created by you o
Here’s a really neat solution from the inestimable Dan “PiGlove, mind where you put the capitals” Aldred. If you’re not able to get to another screen or monitor, or if you’re on the move, this is a very tidy way to get set up. This is a really comprehensive guide, taking you all the way from flashing an SD card, accessing your Pi Zero via Putty, installing VNC and setting up a graphical user inter
序 事前の準備として、Raspberry Pi Zeroを購入するわけであるが、その場合、カメラユニットが付けられる後期型を購入すること。 カメラユニットに関しては、現在販売してるカメラユニットはあくまでPi用なので、別途Zero用のケーブルを購入しなければならない。 以下の販売サイトのURLを書いておくので参考にしてほしい。 Pi Zero (Pimoroni) Cemera Unit (Pimoroni) Camera Cable - Raspberry Pi Zero edition (Pimoroni) また、Zero用のUSB+EatherNet Hubもお奨めである。 Three Port USB Hub with Ethernet ZeroはPi3とは違い、はじめるのがまずは面倒臭い。特に本体にネット関連のモジュールがないので、そういうものをまずは買うところからはじめなければ
Keeping your Raspberry Pi up-to-date Before installing anything it's always good practise to make sure the Raspberry Pi software itself ( collectively known as Raspbian ) is absolutely up-to-date. Often when you get a problem, it can be due to bugs in old versions of software that have long since been fixed. We'll often ask you to update Raspbian as a first point of call when helping you solve a p
Raspberry Piは各種センサを簡単に扱えるのが素晴らしいですね。個人的に使っているセンサについてのメモです。GPSや気温センサ、AD変換、7セグメントディスプレイ、など。モータ系を全然使っていない!追記していきたいと思います。 センサ USB 気温センサ USBで使えるので、Raspberry Piだけでなく一般的なPCでも使用しやすいです。 USB温度センサーで室温をモニタリングしてみた(on Ubuntu Server 12.04) : 或る阿呆の記 インタフェース:USB 値段:1000円(送料で+500円)くらい I2C 気温センサ:LM75B データシードにアドレスマップもあるので、温度を取得するだけであれば、特にライブラリなど必要なく、シェルスクリプトだけでも頑張れる使いやすいセンサです。初期アドレス0x48で、アドレスがいじれるのは3bit分、すなわち最大で8台繋げる
Setup and install See this guide on how to get node.js running on Raspberry Pi. This module can then be installed with npm: npm install rpi-gpio Dependency Please note that this module has a dependency on epoll and that currently it is only possible to build and develop the module on Linux systems. If you are having trouble installing this module make sure you are running gcc/g++ -v 4.8 or higher.
こんな感じで一時間(任意の時間)に一回、Rapberry PiのCPU温度をツイートさせる。 2015-03-11_12:00:03現在 CPU温度は 31.5 ℃です。 — ysdyt_raspi (@ysdyt_raspi) 2015, 3月 11 これが何の役に立つかだって?自己満足だよ!強いて言うなら、ラズパイの定期生存確認が出来る。 必要なパッケージをインストールする 1 2 3 4 $ sudo apt-get update $ sudo apt-get install python-setuptools $ sudo easy_install pip #pipコマンドのインストール $ sudo pip install twython #twythonをpipコマンドでインストール TwitterのAPI情報を取得 Twitterのアカウントを作成し、http://apps.
Select currency If you'd like to view pricing in another currency then select it below. Please note: Currency conversions are estimates and updated daily All prices include UK VAT at 20% where applicable For orders under €150 we will collect VAT at your local rate Prices shown exclude VAT (calculated during checkout) Bitcoin payments are processed via BitPay Orders are billed in GBP (will be shown
Welcome to RetroPie. RetroPie allows you to turn your Raspberry Pi, ODroid C1/C2, or PC into a retro-gaming machine. It builds upon Raspbian, EmulationStation, RetroArch and many other projects to enable you to play your favourite Arcade, home-console, and classic PC games with the minimum set-up. For power users it also provides a large variety of configuration tools to customise the system as yo
Jasper is an open source platform for developing always-on, voice-controlled applications Control anything Use your voice to ask for information, update social networks, control your home, and more. Always listening Jasper is always on, always listening for commands, and you can speak from meters away.
Amazon’s Echo isn’t available here in the UK yet. This is very aggravating for those of us who pride ourselves on early adoption. For the uninitiated, Echo’s an all-in-one speaker and voice-command device that works with Amazon’s Alexa voice service. Using an Echo, Alexa can answer verbal questions and integrate with a bunch of the connected objects you might have in your house, like lights, music
Home Assistantとは Pythonで作られた、オープンソースのホームオートメーションプラットホーム。この分野では、OpenHABというものもあるようだ。 「コンポーネント」と呼ばれる機能を自由に組み合わせて、各コンポーネントが対応するデバイスの制御や自動化を行うことができる。また、Webページに状態を表示し、そこから制御することもできる。 対応するコンポーネントには、電動シャッターなど国内では入手できなさそうなIoT機器もあるが、 IFTTT Twitter PushBullet Philips Hue Raspberry PiのGPIO入出力 Firmata(汎用入出力制御プロトコル)ファームウェアを搭載したArduino MQTTを介した入出力 HTTPを介した入出力 iTunesやGoogle Cast、MPDといったネットワークメディアプレイヤーのデバイス発見と、再生・
planexのありがたい記事を参考に作業。 環境としてはRaspbian wheezyを仮定。 おおまかな流れ : まず、下準備としてカーネルモジュールのビルドに必要な道具を揃える(既に揃えてある人はスルーしてよい)。続いて、ドライバのソースコードを取得し、必要な変更を加えてからビルド、インストールする。 前提知識 記事執筆時点ではGW-450DやWN-AC433UKはRaspberry Piではそのままでは動作せず、ドライバを自分で導入してやる必要がある。 GW-450DやWN-AC433UKはMediaTekのMT-7610Uというチップセットを用いているので、中身は基本的に同じである。ただし、USBのベンダーIDとプロダクトIDは変更されているので、これをドライバ中に記述してやる必要がある。 下準備1: カーネルビルドに用いられたGCCのバージョンを調べる ここでは、raspberr
リリース、障害情報などのサービスのお知らせ
最新の人気エントリーの配信
処理を実行中です
j次のブックマーク
k前のブックマーク
lあとで読む
eコメント一覧を開く
oページを開く