織田信長 ぼちぼち、元気にやっています。少し薬にも慣れた...んかなぁ。相変わらず食べられないけど。朝、指がこわばって文字なんて入力できなかったけど、それはほぼなくなった。関節もどこも痛くない。薬効いてきたんやろな。 で、ブログを書こうと言う気がまた起きてきた。 …
織田信長 ぼちぼち、元気にやっています。少し薬にも慣れた...んかなぁ。相変わらず食べられないけど。朝、指がこわばって文字なんて入力できなかったけど、それはほぼなくなった。関節もどこも痛くない。薬効いてきたんやろな。 で、ブログを書こうと言う気がまた起きてきた。 …
オープンソースからハイスクールフリート、The Beatlesまで何でもありの自称エンターテインメント日記。 ほぼGNOME編のコピペですが…。 ・ひとまずインストールは[標準システム]以外選択しない ・インストール後再起動し、次のパッケージをインストール sudo vim sl (注:slはジョークなので別にインストールしなくてもよい) ・vimを使用する場合はupdate-alternatives --config editorで/usr/bin/vim.basicを選択 ・visudoでsudoの設定 ・/etc/apt/sources.listを編集してCD-ROMから読み込まないようにする ・aptitudeかなにかで(私はapt使ってますが)kde-core kdm ttf-sazanami-mincho ttf-sazanami-gothic ttf-vlgothic x-w
Rails on NaCl Ruby on Rails開発環境の構築 Debian GNU/Linux with RubyGems Debian GNU/Linux 3.1(以下Sarge)上で Ruby on Rails (以下Rails)の開発環境を構築する方法について説明します。 Rails を RubyGems を利用してインストールします。 表記について この文書中では、コマンドプロンプト % は一般ユーザでの実行、# はrootでの実行を表します。 Rails のインストール Sarge では Rails の公式パッケージは用意されていません。そのため、Railsをインストールするにはdebパッケージを作成するか、RubyGems (Rubyのパッケージ管理システム)を利用する必要があります。 ここでは RubyGems を利用して環境を構築する方法について説明します。 Rub
多くのユーザにとってライブCDという概念は既にお馴染みのものだろう。これはオペレーティングシステムをブート可能な状態でCDに焼き込んだもので、光学ドライブからの直接起動に対応したコンピュータであれば、インストール済みオペレーティングシステムをバイパスする形で、ライブCDにある別オペレーティングシステムを実行できるのである。またUSBからのブートアップに対応したコンピュータの場合、これと似た起動方式としてUSB接続式の外部ハードドライブからLinuxを起動させることも可能だ。こうしたライブシステムの場合、ディスプレイアダプタおよびスクリーンや記憶デバイスその他の周辺機器については、その検出と設定が自動で処理されるようになっている。そしてブータブルUSBドライブからは、Debian GNU/LinuxなどメインストリームのLinuxディストリビューションを起動するだけでなく、セキュリティ強化、
Debian Etchのリリース記念(^^;という事で、もう一度EtchでXenを使う場合のまとめ。 ※追記:Domain-UにSargeを使う場合はこちらも見てね。 って、前回リリース直前まとめしたのと全然変わってないですが、前回は過去からの差についてを中心に書いたので、今回はサラからインストールする場合向け(謎) 1:まずDebianをインストールする。 Debianのインストールの方法等は他に譲ります(←手抜き系(^^;) パーティションに付いては、Domain-Uをloopファイルシステムで使うつもりなら全領域/にしても構いませんが、LVMで取るつもりなら、/にいくらか取って残りはLVMにしておくのが良いでしょう。 XenのDomain-0には基本的な部分だけ入っていれば良いので、taskselでは全部外してしまって構いません。 standardまで外してしまってもXenをインスト
リリース、障害情報などのサービスのお知らせ
最新の人気エントリーの配信
処理を実行中です
j次のブックマーク
k前のブックマーク
lあとで読む
eコメント一覧を開く
oページを開く