織田信長 ぼちぼち、元気にやっています。少し薬にも慣れた...んかなぁ。相変わらず食べられないけど。朝、指がこわばって文字なんて入力できなかったけど、それはほぼなくなった。関節もどこも痛くない。薬効いてきたんやろな。 で、ブログを書こうと言う気がまた起きてきた。 …
織田信長 ぼちぼち、元気にやっています。少し薬にも慣れた...んかなぁ。相変わらず食べられないけど。朝、指がこわばって文字なんて入力できなかったけど、それはほぼなくなった。関節もどこも痛くない。薬効いてきたんやろな。 で、ブログを書こうと言う気がまた起きてきた。 …
Debian(Etch)にXen導入 † #apt-get install xen-linux-system-2.6.18-3-xen-686 (最新版を調べて入れる) #apt-get install xen-tools libc6-xen xen-ioemu-3.0-unstable(これも最新版を調べる) ↑ Grub設定 † #vi /boot/grub/menu.lst title Debian GNU/Linux, Xen 3.0, kernel 2.6.12.6-xen root (hd0,0) kernel /xen-3.0.gz dom0_mem=970116 ←メモリを最大まで使うとダメ! module /vmlinuz-2.6-xen root=/dev/mapper/VG1-Root ro libata.atapi_enabled=1 module /initrd.
xen関連インストール sudo apt-get install xen-linux-system-2.6.26-1-xen-686 \ linux-headers-2.6.26-1-common-xen \ libc6-xen \ xen-tools \ bridge-utils xenの設定 後で書く。(設定ファイルみれば大体分かる) domainU作成コマンドの設定 後で書く。(設定ファイルみれば大体分かる) domainUが起動途中で固まる 設定ファイルに extra=’xencons=tty’ を追加するといける。設定ファイルのテンプレートである下記のファイルに書いておくと楽。 # /etc/xen-tools/xm.tmpl extra = 'xencons=tty' domainU内で時間関係のメッセージが出まくる ntpdateを設定する。 参照:Debian – ntpd
既に書いたように、サーバをlennyにしてしまった。まだあまりお勧めは出来ないのだけど。 Xenはちょっとハマりどころがあるので、TIPS。 lennyのXenはVer 3.2.1が入っている。Xenの情報をネットで探すと、3.0以前のやら3.0のやらはいっぱいあるのだけど、3.2はあまりない。しかも、lennyはついこないだ出たばかりだから、そういったことでも情報は少ない。 なけなしの3.2の情報を探すと、いくつかのディレクティブが変更になっていて、 ‘ramdisk’が’initrd’に ‘file:’が’aio:tap:’に ‘xenbr’が’eth’に 変更になったらしいことがわかる。そこで元々ある設定ファイルをこのように変更すると、 動かない のだ。特に’file:’のは「rootになるものがないんで待ってる」という意味のメッセージが出て、5分くらい待った挙句に起動出来なくて失敗
目的 簡単に日本語LaTeX環境を構築できるようにする。 LaTeXに関係するパッケージと環境構築に必要なコマンドを洗い出す(完了) 必要最低限なものを選びだし、それをインストールしてくれるlatex-env-jaパッケージを作成する(完了) ptetex/ptexliveを簡単にインストールできるようにする(未定) テスト用のデータを作成する LaTeXパッケージ一覧 最低限必要なもの teTeXはLaTeXに関するソフトウェアを集めたLaTeXディストリビューションの一つ。pTeXもteTeXを元に日本語対応を行っている。2006年5月、大本のメンテナンス終了が宣言された。Ubuntuでも、Gutsy以降は全てTeX Liveで代替できることになっている。いまだteTeXに依存しているパッケージも存在するため、TeX Liveをインストールしていない状態でpTeXをインストールするとt
使うな まぁうちの使い方が、ソフトウェアRAID + LVM + Xen + JFSという使い方だからかも知れないけど。こう書くと変態的な構成に見えるけど、やってみればことさらに変わった構成ではないと思う。要するにXenの上でJFSを動かしているだけだし、RAIDやLVMなんてのも、仮想化する環境にはありがちの構成だろうし。てか、CPUを仮想化したら、ディスクも仮想化しとかないとメリット半減どころじゃないよ。仮想化環境のボリュームをファイルで構成する時も、そのファイルが載ってるボリュームはLVMにしといた方が、いろいろ都合がいい。だいたいsnap shotが取れるということだけでも、運用をいろいろ楽にする。 で、この組合せだと、高負荷をかけた時にJFSが破壊される。ズタズタって程じゃないけど、いくつかのファイルが飛んでファイルシステムがリードオンリーになるということが、突発的に発生する。何
We have screenshots!Have you ever wondered how a certain piece of software looks and works before spending time installing it? This website lets you browse screenshots of 87,910 software packages coming with Debian and other Linux distributions. Enlarge the collection and upload a screenshot yourself. No registration needed.
自宅の共用アプリ鯖がスペック不足に陥り、代替として導入したT105でいろいろと爆弾を踏んだ気がするので、行った作業をメモ。 完全に走り書きです。 時系列 Debian系列で抵抗 DebianをネットワークインストールさせようとするがT105のNICドライバ BroaccomのNetXtremeがEtchカーネルには入っておらず、インストール出来ず 仕方がないのでUbuntuに逃げて、いつものようにapt-get install ubuntu-xen-server。その後、再起動した後にapt-get updateするとATA周りのエラーが大量に出て強制的に再起動がかかる。 エラーメッセージがあまりにも一瞬過ぎて、大事な部分が読み取れなかったが、頑張って写真を撮ってみて、該当のエラーを検索してみたらOracleVMのドキュメントに同様の記述があり。設定方法を探してみたところ、grubでカーネ
Dreamlinux はDebianベースのディストリビューションの1つであって、デスクトップ環境はGNOMEかXfceかを選択でき、インストール手順も高度に簡単化されており、またDebianリポジトリに収録されていないメジャーなプログラムをインストールするためのスクリプト群も用意されている。付属プログラムの品揃えは、通信、グラフィックス、ミュージックの各分野にOpenOffice.orgを加えたものが用意されており、通常のデスクトップ環境にて必要とされるものの大半がカバーされていると同時に、インストールと設定作業についてもごく簡単に済ませることができる。私が試用した際にはマイナーなバグにいくつか遭遇したものの、それ以外に大きな問題は特に発生しておらず、Dreamlinuxの総合評価は極めて良好としていいだろう。 Dreamlinuxのデスクトップ Dreamlinuxのブートローダは印象
オープンソースからハイスクールフリート、The Beatlesまで何でもありの自称エンターテインメント日記。 ほぼGNOME編のコピペですが…。 ・ひとまずインストールは[標準システム]以外選択しない ・インストール後再起動し、次のパッケージをインストール sudo vim sl (注:slはジョークなので別にインストールしなくてもよい) ・vimを使用する場合はupdate-alternatives --config editorで/usr/bin/vim.basicを選択 ・visudoでsudoの設定 ・/etc/apt/sources.listを編集してCD-ROMから読み込まないようにする ・aptitudeかなにかで(私はapt使ってますが)kde-core kdm ttf-sazanami-mincho ttf-sazanami-gothic ttf-vlgothic x-w
Rails on NaCl Ruby on Rails開発環境の構築 Debian GNU/Linux with RubyGems Debian GNU/Linux 3.1(以下Sarge)上で Ruby on Rails (以下Rails)の開発環境を構築する方法について説明します。 Rails を RubyGems を利用してインストールします。 表記について この文書中では、コマンドプロンプト % は一般ユーザでの実行、# はrootでの実行を表します。 Rails のインストール Sarge では Rails の公式パッケージは用意されていません。そのため、Railsをインストールするにはdebパッケージを作成するか、RubyGems (Rubyのパッケージ管理システム)を利用する必要があります。 ここでは RubyGems を利用して環境を構築する方法について説明します。 Rub
多くのユーザにとってライブCDという概念は既にお馴染みのものだろう。これはオペレーティングシステムをブート可能な状態でCDに焼き込んだもので、光学ドライブからの直接起動に対応したコンピュータであれば、インストール済みオペレーティングシステムをバイパスする形で、ライブCDにある別オペレーティングシステムを実行できるのである。またUSBからのブートアップに対応したコンピュータの場合、これと似た起動方式としてUSB接続式の外部ハードドライブからLinuxを起動させることも可能だ。こうしたライブシステムの場合、ディスプレイアダプタおよびスクリーンや記憶デバイスその他の周辺機器については、その検出と設定が自動で処理されるようになっている。そしてブータブルUSBドライブからは、Debian GNU/LinuxなどメインストリームのLinuxディストリビューションを起動するだけでなく、セキュリティ強化、
Debian Etchのリリース記念(^^;という事で、もう一度EtchでXenを使う場合のまとめ。 ※追記:Domain-UにSargeを使う場合はこちらも見てね。 って、前回リリース直前まとめしたのと全然変わってないですが、前回は過去からの差についてを中心に書いたので、今回はサラからインストールする場合向け(謎) 1:まずDebianをインストールする。 Debianのインストールの方法等は他に譲ります(←手抜き系(^^;) パーティションに付いては、Domain-Uをloopファイルシステムで使うつもりなら全領域/にしても構いませんが、LVMで取るつもりなら、/にいくらか取って残りはLVMにしておくのが良いでしょう。 XenのDomain-0には基本的な部分だけ入っていれば良いので、taskselでは全部外してしまって構いません。 standardまで外してしまってもXenをインスト
リリース、障害情報などのサービスのお知らせ
最新の人気エントリーの配信
処理を実行中です
j次のブックマーク
k前のブックマーク
lあとで読む
eコメント一覧を開く
oページを開く