Raspberry Pi 2を手に入れたのでケースを作ってみました. 市販のケースを買うのもいいですが,ケースを自作するのも楽しさの一つだと思います. 調べてみるとケースは3Dプリンタやレーザーカッターで作っるのがメジャーなようです. 3Dプリンタで作ると市販の射出成形のケースに見劣りしそうだったので,レーザーカッターをメインに使いました. レーザーカッターは基本的に板を切るものなので,積層や箱組で立体的にケースを作るという手法が多く見られました. 今回,私は板を金属の支柱で支えることでケースを作ることにしました. シンプルですが,各コネクタやIOへのアクセスを考えると悪くない選択だと思います. Raspberry Pi2とケースの部品は以下のようになります. 各部品は,自作品や在庫品を使用しています. ここを見てくれた方の参考になるよう,同等の市販品を参考に載せました. もっと安いものも