Welcome to MyDNS®JP We are Free and Easy to use Dynamic DNS! (DDNS) About Log In Welcome to MyDNS.JP MyDNS.JP is a Free Dynamic DNS(DDNS) that anyone can easily use. It can be used for various purposes such as Home Servers, Office Servers, WEBCAM and VPS. Whether you use the Free Sub-Domain provided by MyDNS.JP, or Original domain that you already have. And IPv4 address(A) and the IPv6 address(AAA
ポートチェックテスト【外部からのPort確認】は、サーバー監視者向けにご提供しています。 ご指定のホスト名またはIPアドレスのご指定ポート番号に、当社サーバーよりTCP接続を行うことで、外部(インターネット)からの疎通確認を行うことができます。 「メンテナンスを行ったが、サーバやネットワーク機器にアクセスできるか?」 「サーバやルータのポートは開放されているか?」 「サーバやルータのポートは閉じているか?」 Port応答チェック ご指定のサーバやネットワーク機器に当社サーバより「Portコマンド」を発行し結果をブラウザ上に表示します。 該当サーバに実際にアクセスされますのでログが残る場合があります。 ご自身で管理・運営しているサーバやネットワーク機器のみでご利用ください。 使用不能文字:<>"{}|\^[]`#;?@&=+$,'()
サーバの状態を長期・継続的に取得してビジュアライズすることで、いままで見えなかったことが見えるようになる。これを実現するソリューションがMRTGだ。(編集局) 前回は、コマンドラインベースでサーバの情報を取得する方法をいくつか紹介しました。「現在」の状態を確認するだけであれば前回紹介したツールでも問題ないのですが、システムを監視する場合、「その瞬間」のデータよりも長期的なデータの推移を見たいという方が多いと思います。 また、多くの場合、人間がシステムを常時監視するわけにはいきません。そのため、定期的にシステムを監視する操作を行い、監視項目が設定した閾値を超えたらメールで管理者に通知するといった処理が必要になります。 今回は、上記の要件を満たすためMRTGというソフトウェアを利用することを考えてみます。 MRTGとは MRTG(Multi Router Traffic Grapher)は、S
sshにはダイナミック転送という機能がある。この機能を使うと、sshはアプリケーション側にはSOCKSプロクシとして振る舞うが、そこからsshの接続先までは暗号化された状態で通信が行われる。 これだけだと通常のトンネリングとどう違うのかよくわからないかもしれないが、ダイナミック転送の場合は転送ポートを指定する必要がない。ここがダイナミックと表現される所以だろう。 例えば、オフィスAにある開発サーバdev1にオフィス外からアクセスしたいとする。しかし、dev1はオフィス外には公開されておらず、踏み台サーバladd1を経由してしかアクセスするしかない。ladd1はsshのみが動いており、これまではsshのトンネリング機能を使ってアクセスしてきたのだが、ウェブアプリケーションをデバッグする際はいちいちウェブアプリケーションのポート毎にトンネルを掘るのが面倒くさい。オフィスに限らずデータセンターへ
リリース、障害情報などのサービスのお知らせ
最新の人気エントリーの配信
処理を実行中です
j次のブックマーク
k前のブックマーク
lあとで読む
eコメント一覧を開く
oページを開く