iPhone5では日本でもテザリングが解禁になったため、お外で一時的にパソコンをネット接続する際にとても重宝するようになりました。私はUbuntuの入ったPCをお外に持ち出すことが多いのでWifiテザリングを利用していたのですが、カンファレンス等で沢山の人が集まるとwifiが汚染されて全く繋がらなくなることが多いです。 そこで、UbuntuでUSBテザリングを試みたのですが、残念ながらUSBケーブルを差しても何も起こりません。。 googleさまにお伺いしたところ、とても良いページを見つけました。 Get iPhone USB tethering working on Ubuntu 12.04 - Ubuntu Sharing Downtown Doug Brown » Tethering iPhone 5 over USB on Ubuntu 12.10 (ugly hack) USBテ
Working with hugedomains.com was a quick and easy process. We got to speak to multiple real people located in Colorado without having to wait on hold! Our only complaint was we felt we had to overpay more than this particular domain was worth, and we weren't able to negotiate it down to a level that we felt was fair. However, payment and delivery were seamless, and within a few hours we had all of
現在Ubuntu10.04にてソフトのmotionとUSBカメラを使用し監視カメラとして使用しています。 節電目的でPC台数を2台から1台に減らすために PC1台で2台のUSBカメラ(ロジクールWebcam C300) での運用を試みましたが2つの画像が入り混じる状態です。 USBカメラを繋いだ直後には 一台目には/dev/video0が作成され 二台目には/dev/video1が作成され UbuntuはそれぞれをVidoDeviceとして認識しているようです。 motion.confでの設定で thread1.confには/dev/video0 thread2.confには/dev/video1 と設定しているのですが2つの画像が入り混じる状態です。 色々やっていて気がついたのですが /dev/v4l/by-id/と/dev/v4l/by-path/を見ると /dev/v4l/by-id
最近のUSBウェブカメラ(UVC対応)は非常にお安くなってきました。私の住む田舎の量販店でも1000円程度で130万画素のウェブカメラが買えます。amazonでも沢山売っているし非常に手頃です。 今回はMJPG-streamer、USBウェブカメラ、ubuntu(Linux)を使って簡単にストリーミングサーバーを作ってみます。 ちなみに私の場合、生まれた娘を外出先から見るのに使ってます。ハムスターや猫などを見たりするのもいいかもしれません。 準備 ubuntuがインストールされたパソコン(ここではubuntu 10.04で検証) USBのウェブカメラ(UVC対応) 確認 まず、LinuxのカーネルがUVCに対応しているか、USBのウェブカメラがUVC対応か、を確認しておくと後で残念な気分になりません。 Linuxのカーネルはバージョンが2.6.26以上(くらいだったはず)であれば標準で
Visual C# HSP Visual C CGI Javaアプレット ◇Visual C# icon◆キャプチャ&HTMLツクール◆ GOOD!! 2007.04.08up サムネイル生成やHTML出力もできる、画面の一部も簡単に取り込めるキャプチャソフト。 FTPアップロード機能つき(画像のみ) icon◆おてがる画像変換◆ GOOD!! NEW!! 2007.04.30up 補間アルゴリズムを選べる画像縮小ソフト。Bicubicというアルゴリズムを用いて高品質な縮小が可能。 任意の文字列を画像に合成することもできます。 Vectorソフトレビューに掲載されました。(掲載時のバージョン:0.0.3) 窓の杜で紹介していただきました。(掲載時のバージョン:0.2.3) [おてがる画像変換をVectorからダウンロード] 画像Visual C#で作られたソフトは全てWindows専用です
NetBookに分類されるノートPCの特徴は、Intel AtomやVIA C7といった「低発熱だが非力」なプロセッサを搭載していることです。こうした非力な環境ではUbuntuの標準デスクトップ環境であるGNOMEよりも「軽い」環境を利用した方が快適に利用できることでしょう。 今回はNetBookなどの「非力な環境」に向けた、軽量デスクトップ環境を利用するレシピを紹介します。 Xubuntuの利用 Ubuntuのバリエーションとして、「軽い」デスクトップ環境であるXFceを利用した「Xubuntu」があります。新規にXubuntuをインストールしなくても、すでにUbuntuをインストールした環境があればXubuntuの成果物をUbuntu環境にインストールし、Xubuntuとして使っていくことができます。 インストールは第6回にもある通り、以下のように行います。 $ sudo apt-g
FREITAG コレクション My FREITAG コレクション FREITAGに出会って約1年。 F-Cutという自分でデザインするDRAGNETからスタートしたコレクションが徐々に増えてきた。 自分が使うものだけでなく、ギフトとしてもいくつか買った。 総計いくらだったかは、知らないが、5種類のFREITAGを Flickrにてセットにしてみた。 FREITAG set in Flicker 最近は、街で歩いていても見かけるようになったFREITAGな人々。 それもそのはず、東京だけでFREITAGを扱っているショップがFREITAGのオフィシャルサイトに登録されているだけでも14件。 どうでもいいこだわりだが、 私はFREITAGをオフィシャルサイトにて購入する事にしている。 別に理由は特別にはないが、F-CUTはオフィシャル以外では販売していないし、他にもオフィシャルならで
Installing LAMP On Ubuntu For Newbies というサイトの説明どおりにやったら簡単にできました。 インストール アプリケーション → アクセサリ → 端末 を起動 以下のコマンドを実行。 sudo apt-get install php5 libapache2-mod-php5終わったらApacheを再起動。 sudo /etc/init.d/apache2 restart 動作確認 /var/www/ ディレクトリにPHPファイルを作る。 sudo gedit /var/www/testphp.php エディタが立ち上がったら、下記を入力。 <?php phpinfo(); ?> ブラウザで動作確認 http://localhost/testphp.php たったこれだけ!
Driver overview This page details support for the Intel GMA500 "Poulsbo" video hardware with Ubuntu 12.04 and higher. Unfortunately the support for this hardware is extremely limited on Linux. There are several drivers, but all lack certain basic features, such as future and current maintenance or support for suspend and hardware acceleration. Currently, the best supported driver for Ubuntu is gma
Firefox 4.0 にJavaのプラグインが入っていなかったので、ついでにOracle(旧Sun) のJavaも入れることにしました。 Ubuntu 9.10まではsun-java6-jreとかあったのですが。。。どこ行ったのでしょう?? --- 2011/6/27 追記 --- firefoxのプラグインの手順が不適切でした。修正しました。 それから、手順の中で使用しているgalternativesが私の環境で起動時にパスワードを聞いてこない事が発生しています。同様の現象が発生しましたら、端末から sudo galternativesで起動して下さい。 --- 2011/6/27 追記終わり --- <<手順>> ※まずはJREを基本に書いてあります。 すぐにJDKをインストールする方は、JDKに含まれているJREを使っても構いません。 適宜、読み替えてください。 1) ダウンロード
はじめに Ubuntu 11.04がリリースされました。 早速インストールして環境を作ったので、やったことを書いておきます。 とりあえず開発環境以外のものだけです。開発環境構築編はこちら。 環境 Ubuntu 11.04 32bit ThinkPad X201i 注意:「システムの設定」の場所 10.10までは、システムの設定はパネル上の「システム→設定」や「システム→システム管理」から設定していました。 11.04では、これらの設定は画面右上の電源ボタンの「システムの設定」から行うように変更されています。 環境構築 ホームディレクトリのディレクトリ名を英語にする $ LANG=C xdg-user-dirs-gtk-update CapsLockキーをCtrlキーにする 1. システムの設定→キーボード→「レイアウト」タブの「オプション」をクリック 2. 「Ctrlの位置」で「Make
8月9 Ubuntu LinuxをUSBメモリにインストールする方法《9.04対応》 カテゴリ:Ubuntu 9.041CD&USB Linux アクセス解析したところ、かなり古い記事へのアクセスが多いようなので、一応、現時点で最も簡単な方法を書き直しておきます。 過去の記事:Ubuntu LinuxをUSBメモリにインストールする方法 上の記事の投稿時点では、USBメモリへのインストールはかなりハードルが高い作業でしたが、Ubuntu 9.04(Jaunty Jackalope)の場合、当時と比較して、格段に易しくなっています。 USBメモリへのインストールについてUSBメモリへのインストール方法は、大別して2通りあります。 1つは、通常HDDへのインストールと同じ手順で行う方法です。最近はUSBメモリを自動的に指定してくれるので、リスクは軽減されているものの、最後のステップで本体のHD
ufw(Uncomplicated FireWall)は、Ubuntuで標準的に利用できる、「iptablesを簡単に設定するツール」です。ufwを利用することで、「外部からの接続は基本的に受け付けない」「sshだけは許す」などといった設定を、iptablesにくらべて格段に少ない操作で実現できます。 今回と次回の2回にわけて、ufwを使って、サーバーなどの設定を簡単に行うレシピを紹介します。 ufwの基本 ufwは、Canonicalの社員であり、Ubuntuのセキュリティ関連モジュールやセキュリティアップデートを主に担当しているJamie Strandboge氏が中心になって開発している、「iptablesのフロントエンド」となるツールです[1]。Ubuntuには8.04で取り込まれています。過去に本レシピでも、第45回でごく軽く内容を紹介しています。 今回はコマンドラインか
リリース、障害情報などのサービスのお知らせ
最新の人気エントリーの配信
処理を実行中です
j次のブックマーク
k前のブックマーク
lあとで読む
eコメント一覧を開く
oページを開く