OpenfilerをSamba(Windowsファイル共有)サーバとして設定するための設定メモ お手軽にエンタープライズファイルサーバが作成できる… (体裁が整う w Openfilerを起動すると、設定用GUIへのアドレスが表示される。 ( ここでは、https://192.168.1.63:446/ と表示されている ) セットアップ直後の状態では、ユーザ名 "openfiler"、パスワード "password" でログオン可能。 RAID-1の共有パーティションを作成 Volumesタブの"Block Devices"メニューで、システムで認識している物理デバイスが表示される。 この場合は、2台のハードディスク /dev/sda と /dev/sdb が表示されている。 それぞれのディスクに、パーティションを作成する。 例えば、/dev/sdaのリンクをクリックすると次のようになる
Simpler Openfiler USB Install??? I haven't tried this, but it should work and of course I thought of it after posting the Simple Openfiler USB install... After doing both the USB and hard drive install, you should be able to use chroot to update the USB drive directly. Just mount the USB root partition, mount the USB boot partition under the boot directory of the USB root partition, cd to the USB
Setting up a High Availability NAS/SAN using Openfiler Installing and Configuring Openfiler with DRBD and Heartbeat Introduction This HowTo? focuses on setting up the OpenSource NAS/SAN Openfiler as a High Availability storage. There currently does not appear to be a lot of documentation available on setting it up in version 2.3, so we thought we would document it here. We will follow the versi
Installing and Configuring Openfiler with DRBD and HeartbeatIntroductionOpenfiler is a high performance operating system tailored for use as a SAN/NAS appliance. This configuration will enable two Openfiler appliances to work in an Active/Passive high availability scenario. RequirementsHardware2 x boxes that meet the minimum spec of Openfiler's hardware specifications.2 x ethernet interfaces in ea
CentOS Stream 9において, kernel 5.14.0-171.el9.x86-_64 をインストールした際に、 error: ../../grub-core/kern/efi/sb.c:183:bad shim signature. error: ../../grub-core/loader/i386/efi/linux.c:259:you need to load the kernel first. Press any key to continue... と表示されて起動しなくなりました。 Bootメニューで1つ前のカーネルを指定すれば起動しますが自動起動しなくなるので大変です。 原因はわかりませんがKernelを元に戻す方法を調べました。 カーネルバージョンを元に戻す方法 上記を参考にしていますが、 まずは1つ前のカーネルで起動します。以下rootで操作しています。
2008.12.22 OpenfilerでiSCSI カテゴリ:Linux Openfilerを使ってiSCSIなNASを作ってみた。これはその備忘録。 初期状態 サーバ ML115(初代) ディスク構成 1TB x 4のHDDで2つの1TBのRAID1を組む。 OS構成 Xenの上に以下のOSを入れている。 openSUSE 11.0 (Domain-0 x86_64) openSUSE 11.0 (Domain-U x86_64) WindowsXP (Domain-U HVM i386) FreeBSD 7.0 (Domain-U HVM i386) 目的 ディスクボリュームサイズを動的に変更したかったため、 Domain-0側でDomain-U openSUSEの/home用ディスク領域を確保し、NFSでマウント していた。 NFSマウントの影響でSamba経由のファイル転送やソフ
リリース、障害情報などのサービスのお知らせ
最新の人気エントリーの配信
処理を実行中です
j次のブックマーク
k前のブックマーク
lあとで読む
eコメント一覧を開く
oページを開く